For a tandem axle trailer like your Crusader Fifth wheel 28RL we have the Correct Track Tandem Axle lift kit part # RR23QX which will give you a lift of 2-1/4 inches and would help level your trailer like you are wanting. A lift like this is realistically only option you'd have since your springs are mounted above the axle already. view full answer...
I do have some options for you to add lights to your awning. If you have a Lippert Solera Awning then there may be a light track on the coach under the awning and in which case you would just use the LED Fabric Light Kit like part # LC674282 and slide it into the track. If you don't have the built-in track or another brand of awning then you can use a simple peel and stick light like the LED Light Strip for Solera RV Awnings part # LC423331 which can be wired to a switch of your choosing. view full answer...
I have complete replacement option for you, but unfortunately the face of the control panel for your Lippert Ground Control 3.0 and Travel Trailer RV Leveling System is not available separately and you will need to replace the entire control panel.
The correct replacement control panel is the # LC421484 you were looking at.
I included a video of the # LC421484 for you to take a look at. view full answer...
I would be happy to recommend a trailer hitch receiver and 5th wheel rated bike rack for your 2019 Prime Time Crusader 5th Wheel Trailer.
Starting with the hitch I recommend the Curt Adjustable Width Trailer Hitch Receiver # 13703 as it will fit box frames, C-channel frames, or I-beam frames that are 22"-72" wide. The # 13703 is a Class III receiver that has a 350lb maximum tongue weight rating and 3500lb maximum trailer weight rating making it perfect for carrying a bike rack. You will... view full answer...
We aren't able to source the sound bar you are looking for but it looks like it may be discontinued so you'd need to go with a different solution like the Furrion part # FSB2N25MCBL that you referenced. The wiring colors won't be an exact match but they are all individually labeled on the Furrion which would make it a little easier. view full answer...
If you have the Lippert Ground Control 2.0 Electric Leveling System on the Crusader 5th Wheel then you'll need the Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 part # LC241846 for 29-1/2" outer tube or part # LC241845 for 33-1/2" outer tube. They will work on either side of the trailer. view full answer...
In order to determine the capacity of the rear bumper on any fifth wheel trailer you'll need to reach out to the trailer manufacturer as we don't have this information. That said, it's typically around the 200 lb mark. If you need/want more we do have a way to strengthen the rear bumper using the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR which increases the capacity to 400 lbs. In order to carry cargo and gear on the bumper, I highly recommend the etrailer... view full answer...
If you use the Furrion Chill adapter part # C-FACR15SA-A01 you can easily install a Chill AC 15k unit part # FR86PR in place of your Dometic Brisk using the same ducting and electrical connections. This will allow your current thermostat and controls to function with the Chill. view full answer...
Go To Results